The Standard Ancestor Program, 348AAAA

The standard ancestor program, 348AAAA, used for most of the runs reported herein is very similar to the predefined ancestor A2 described in Section A.3.2. The only differences are that the promoter and associated binding region at the start of the program are 6 bits long rather than 12, and a move instruction has been added near the end of the program. The listing of 348AAAA is as follows:

1	101100
2	et_collect
3	nwm_clear
4	adrb
5	nop_10
6	nop_11
7	nop_00
8	push_a
9	pop_c
10	et_collect
11	dec_c
12	dec_c
13	dec_c
14	dec_c
15	dec_c
16	dec_c
17	push_c
18	pop_a
19	swap_ab
20	et_collect
21	adrf
22	nop_01
23	nop_00
24	nop_11
25	nop_00
26	nop_01
27	nop_11
28	swap_ab
29	set_jmp
30	et_collect
31	et_collect
32	clr_f
33	mov_ic
34	push_c
35	swap_cd
36	push_c
37	swap_ab
38	sub_ab
39	swap_ab
40	pop_c
41	swap_cd
42	pop_c
43	if_not_fl
44	nwm_write
45	if_fl
46	clr_jmp
47	jmp
48	et_collect
49	reg_create
50	nop_00
51	nop_10
52	nop_11
53	nop_00
54	nwm_divide
55	move
56	stop
57-58	010011000111
promoter	101100